Projects and technical reports
Reports, deliverables and posters from industrial and European research projects at CIMNE and UKAEA, grouped by field. Many fusion reports are internal; those with a download link are public.
Nuclear fusion engineering
Reports for JET, ITER, MAST-U and DEMO written at UKAEA: electromagnetic loads on in-vessel components, inverse reconstruction of disruption forces, fault analyses of coils and magnetic diagnostics, and design proposals.
-
Inverse force reconstruction algorithms for ITER disruption events
D. Iglesias, R. Otin, and A. Tallarigo
ITER_D_TL9N7R, 2017
-
Impact of DEMO-relevant ferromagnetic bolts on JET performance
R. Otin, V. K. Thompson, and P. J. Lomas
EAG16-T019, 2016
-
New design proposals for the JET ITER-like antenna electric contacts
V. K. Thompson and R. Otin
FIVER_ST_1500_D001, 2015
-
Induced electromagnetic loads on rectangular plates in nuclear fusion scenarios
R. Otin
EAG15-T018, 2015
-
Electrical failure analysis of MAST-U P1 coil
R. Otin, J. Last, and P. Jacquet
EAG15-T015, 2015
-
Fault analysis of JET in-vessel Mirnov coils
R. Otin, M. Tsalas, and M. Baruzzo
EAG15-T014, 2015
-
Limits of applicability of the induction-less approximation on nuclear fusion scenarios
R. Otin
EAG14-T015, 2014
Bioelectromagnetics
How much electromagnetic energy the human body absorbs from antennas, RFID tags, welding equipment and 5G devices. The key quantity is the specific absorption rate (SAR), which these studies compute and compare with exposure limits such as EU Directive 2013/35/EU.
-
Development of modelling approaches to assess internal and external exposure
E. Soudah, R. Otin, M. Spirito, …show all 10 authors
E. Soudah, R. Otin , M. Spirito, F. Schettino, M. D. Migliore, N. Petroulakis, A. Laromaine, P. Alonso, M. Velghe, and Y. FeldmanProject NextGEM HORIZON-HLTH-2021-ENVHLTH-02-01, Deliverable 3.6, September 2024
-
Electromagnetic field exposure assessment of TIG-AC and CD stud welding in accordance with the EU Directive 2013/35/EU
R. Otin and R. Salmon
EAG17-T004, 2017
-
ERMES: Numerical tool for SAR computations
R. Otin
CIMNE IT-584, 2009
-
Numerical study of the thermal effects induced by a RFID antenna in vials of blood plasma
R. Otin
CIMNE IT-583, 2009
-
Specific absorption rate computational tool for SMART
R. Otin
Project SMART ANTENNAS (SMart Antennas system for Radio Transceivers)
European Commission, EUREKA PIDEA+ 04-1612005-2008, July 2005 - September 2008
Electromagnetic compatibility
Making electronic systems immune to interference and quiet towards their neighbours. Much of this work models braided cable shields: the weave of the braid controls how much external field leaks inside the cable, a property measured by the transfer impedance. Recent work applies ERMES to quantum computing hardware.
-
Use of ERMES in quantum computing
F. Chaudry, R. Otin, R. Macdonald, J. Paterson, and S. Aria
UKAEA KAGF Project 10083751, July 2024
-
Electromagnetic modeling of braided wire shields
R. Otin, H. Schippers, J. Verpoorte, and R. Isanta
Project HIRF SE (High Intensity Radiated Fields Synthetic Environment)
European Commission, FP7 ACP7-GA-2008-205294, December 2008 - May 2013 -
A CAD tool for the electromagnetic modeling of braided wire shields
R. Otin and R. Isanta
CIMNE IT-639, 2013
-
Project NET-EMC: Numerical simulation report (CIMNE)
X. Roca, M. Coma, R. Otin, and J. Mora
CIMNE IT-628, 2012
-
Interfase GiD per a la generació paramètrica de geometries trenades per a l'apantallament de cables coaxials
R. Mendez, R. Isanta, R. Otin, and O. Fruitos
CIMNE IT-594, 2009
Electromagnetic forming
Shaping metal with a strong, very short magnetic pulse instead of a press. The pulse induces currents in the workpiece, and the resulting Lorentz force pushes it into the die. These reports couple the electromagnetic and mechanical problems to find the best frequency and capacitance for the process.
-
Electromagnetic metal forming
R. Otin, R. Mendez, and O. Fruitos
CIMNE IT-618, 2011
-
Metodología para la simulación de procesos electromagnético-mecánicos acoplados. Simulaciones 3D y validaciones experimentales preliminares
R. Mendez, A. Ferriz, O. Fruitos, and R. Otin
CIMNE IT-568, 2009
-
Metodología para la simulación de procesos electromagnéticos mecánicos acoplados. Informe de avances
R. Mendez, A. Ferriz, R. Otin, and O. Fruitos
CIMNE IT-536, 2008
Software development
User manuals and design documents for ERMES and the open tools developed around it.
-
ERMES 20.0 user manual
R. Otin
UKAEA, 2024
-
Description and user guide of ERMES v7.0
R. Otin
CIMNE IT-633, 2013
-
ERMES user guide
R. Otin
CIMNE IT-617, 2011
-
Open tools for electromagnetic simulation programs
J. Mora, R. Otin, P. Dadvand, E. Escolano, M. A. Pasenau, and E. Oñate
CIMNE PI-273, 2005